DIY wall spice rack

Nov 24th

wall spice rack – Set one of many cabinets in lengthy skinny edge and positions the 2 sides on both facet of him, boards in order that the three method make a “U”. Press the boards collectively so cosy and pre-drilled two holes evenly spaced throughout both sides panel and into the rack; this may function the underside shelf of the shelf for spices. Join the three boards with wooden screws. Slide the opposite board wall spice rack in place, about 6 inches (15 cm) on the primary shelf and parallel to it.

Drills a gap of 1/four inch (0.6 cm) on both sides panel, about three inches (7.5 cm) above every shelf and half of inch (1.2 cm) from the entrance of the spice shelf. Spend two rods by means of the holes and safe in place at every finish with a lightweight layer of wooden glue. Go away an hour for wooden glue dries.

Put wall spice rack the other way up and place the backboard on it. Predrilled holes on the 4 corners and uniformly alongside the lateral edges of the rear panel and facet panels inside. Une backboard to spice shelf with wooden screws. Dangle the shelf for spices on the wall by screwing instantly by means of the backboard and into the specified part of the wall.